This is a O-31 right hand remote switch for O-gauge layouts. The switch has a LED switch controller, LED Switch lantern, optional constant voltage power plug and automatic non-derailing feature. All tubular track need to be screwed down for best results. The switch is made by Lionel.
This is a O-31 left hand remote switch for O-gauge layouts. The switch has a LED switch controller, LED Switch lantern, optional constant voltage power plug and automatic non-derailing feature. All tubular track need to be screwed down for best results. The switch is made by Lionel.
This is a plastic graduated trestle set that has 26 trestles. The trestles range from about 1/2″ to 6″ high. They are a plastic log with a plastic concrete base. The set will not fit the Lionel fast track. This is made By K-Line by Lionel.
Used for keeping O27 track together in a temporary setup. This is a set of 12 pieces per box.
These track clips are used for keeping O gauge track together in a temporary setup. This is aset of 12 per box.
The length of this 0 gauge remote control track is 10″ long, and it is used for uncoupling cars or for operating cars like dump cars.
The length of this section of 0 gauge insulated track is 10″ long, and it is used for triggering operating accessories like crossing signals. It is also used for making separate blocks or separate powered sidings. It is the same as a 10″ straight, but has a plastic pin in one out side rail.
The length of this 0 gauge 72″ diameter section of track is 14″, and you need 16 pieces to make a complete circle.
The length of this 0 Gauge 54″ diameter section of track is 10 3/8″ long, and you need 16 pieces to make a complete circle.
The length of this 0 gauge 42″ diameter track is 10.5″ long, and you need 12 pieces to make a complete circle.
The length of this section of 0 gauge track is 10 5/8″ long, and you need 8 pieces for a complete circle.
The length of this section of 0 gauge half curve is 6 inches long.
The length is 40 inches long of this section of 0 gauge straight track.
The length is 10 inchs long of this section of 0 gauge straight track
This O gauge straight track section is 5 1/2″ long.
This 027 manual right hand switch allows your train to go straight or curve to the right to follow a different track. It must be controlled from the location of the switch. It is 8 3/4″ long on the straight.
